Keeprs Support
Keeprs copies photos from a Ricoh GR IV to your iPhone. This page covers pairing, the things that most often go wrong, and how to report a problem.
Pairing for the first time
- On the camera: Menu › Setup › 6 Communication Settings › Pairing › Execute Pairing. The camera waits for the phone.
- In Keeprs, tap Find camera. Keep the camera’s screen on until every step has a checkmark.
- Allow Bluetooth and the camera’s Wi-Fi when iOS asks. Keeprs stores the camera’s Wi-Fi name and password in your Keychain so this only happens once.
After that, opening Keeprs wakes the camera over Bluetooth, joins its Wi-Fi and shows how many photos are new.
If something goes wrong
Every failure in Keeprs ends in a message that names the step and what to do. The common ones:
- Camera not found. Press the camera’s power button and keep it awake. If it was never paired with this phone, run Execute Pairing again.
- Camera does not leave the menu. Half-press the shutter to return to shooting mode, then tap Retry.
- iPhone could not join the camera’s Wi-Fi. Tap Open Settings and join the network named
GR_… by hand, then come back to Keeprs. The password is under the camera’s Communication Settings.
- Camera stopped responding mid-import. The GR IV drops its Wi-Fi about a minute into the first session. Keeprs reconnects and resumes on its own; anything that did not make it stays selected so a retry is one tap.
- Slow imports. The GR IV’s Wi-Fi is 2.4 GHz only. Originals arrive at roughly half a megabyte per second; choose Small JPEGs on the home screen for 1920 px files that take a few seconds each. DNG files are always saved in full.
- Keeprs cannot see my old photos. By design. Keeprs asks for add-only Photos access and never reads your library. Imported photos appear in the Photos app’s Recents.
Diagnostics
Keeprs keeps a short log of connection and import events on your phone. Open Settings (gear icon) › Diagnostics to read it and use the share button to send it along with a report. Wi-Fi passwords are redacted from the log.
Reporting a problem
Open an issue at github.com/Ecalzo/GRIV-ios/issues with the camera’s firmware version, the iOS version, what you expected, what happened, and the diagnostics log if you have it.
Privacy
Keeprs has no account, no servers and no analytics. The full policy is on the privacy page.
Keeprs is an independent app and is not affiliated with or endorsed by Ricoh. RICOH and GR are trademarks of Ricoh Company, Ltd.